Skip to content

Turn on call forwarding

View as Markdown

Forwarding sends every call on the number your customers dial to your Virnika number. Your specialist usually does this with you on a call, but you can also do it yourself with the steps below.

  • Your Virnika number. It’s on your Virnika dashboard, or ask your specialist.
  • For landlines: a phone on the line you’re forwarding. Forwarding codes only work when dialed from that line, so do this at the store.
  • For VoIP: a login to your phone portal, or whoever manages it.
  • Your return-to-store line is working. Once forwarding is on, your current phones stop ringing, and transfers ring the return-to-store line instead. Landline stores: set up your transfer phone first.

Most landlines turn forwarding on with a code dialed from a phone on the line. This works for Verizon, AT&T, Spectrum, Comcast, Optimum and most other landline providers.

  1. Use a phone in the store that’s on the number your customers dial. Wait for a dial tone.

  2. Some lines play a second dial tone or a short tone after this. That’s normal.

  3. Dial all 10 digits, including the area code.

  4. You’ll hear either confirmation beeps, or the Virnika number answers. Either way, forwarding is on. Hang up.

    If the call is busy or doesn’t go through, some providers ask you to repeat the steps within two minutes.

To turn forwarding off, dial *73 from the same line and hang up when you hear the confirmation tone.

If *72 doesn’t work on your line, your provider may use a different code or need to make the change for you. Check provider notes, or call your provider with your account PIN ready and ask for unconditional call forwarding to your Virnika number.

On VoIP, forwarding is a setting in your phone provider’s online portal. The names vary, but the steps are similar:

  1. Sign in to your phone portal and open the number, user or extension your customers call.

  2. Look for something like Call Handling, Call Forwarding or Call Rules.

  3. Choose the option that forwards every call, often called “Always” or “Unconditional”, not only when busy or unanswered. Enter your Virnika number and save.

RingCentral and Spectrum Business Connect forward through a relay extension instead. See Choose your setup, and provider notes for portal tips for each provider.

Call your main number from a cell phone, not from a phone in the store. Then check that:

  1. The “this call may be recorded” message plays.
  2. Your store’s phone rings and staff can answer (while we’re listening, before Virnika starts taking orders).
  3. The call shows up in your Virnika dashboard.

If the call rings your old phones instead, forwarding isn’t on. Check the Virnika number for typos and try again, or see troubleshooting forwarding.

To stop Virnika answering for a while, pause it from your store page instead of turning forwarding off. Calls ring your store, and you can resume with one tap.

Only turn forwarding off (*73 on landlines, or in your portal) if you’re stopping Virnika for good, or your specialist asks you to.