Set up your transfer phone
View as MarkdownIf your store is on a landline, we send you a phone that becomes your return-to-store line. When Virnika transfers a caller to your staff, this phone rings.
The phone arrives already set up with your store’s line. You don’t enter any account details. You only connect it to your internet, and it does the rest.
Which phone did you get?
Section titled “Which phone did you get?”We pick the phone that fits your store. The box says which one it is.
| Phone | What’s in the box | What it needs |
|---|---|---|
| Yealink AX83H | A cordless Wi-Fi handset, battery, charging cradle and power adapter | Your store’s Wi-Fi name and password |
| Yealink W73P | A cordless handset, a W70B base station, battery, charging cradle, two power adapters and a network cable | A free network port on your router or switch, and an outlet near it |
Yealink AX83H (Wi-Fi)
Section titled “Yealink AX83H (Wi-Fi)”The AX83H connects only over Wi-Fi. It has no network cable.
Put in the battery and charge it
Section titled “Put in the battery and charge it”Put the battery in the handset and close the battery cover. Plug the charging cradle into an outlet near the counter with the included power adapter, and set the handset on it. The light at the top of the handset glows red while it starts up and charges, and turns green when it’s fully charged.
Choose your language
Section titled “Choose your language”When the screen lights up, the setup screens start. Select your language and press OK or Next.
Join your Wi-Fi
Section titled “Join your Wi-Fi”Pick your store’s Wi-Fi network from the list and press OK. Enter the password with the keypad and press Save.
A Wi-Fi icon appears at the top of the screen once it’s connected.
If you skipped the setup screens, press OK to open the menu, go to Wi-Fi → Wi-Fi Network, make sure Wi-Fi is turned on, and choose your network.
Let it finish setting itself up
Section titled “Let it finish setting itself up”Once it’s online, the phone downloads your store’s settings on its own. This takes a few minutes, and it may restart. You don’t need to do anything.
Test it
Section titled “Test it”Call your return-to-store number from a cell phone. The handset should ring. Or wait for your specialist, who calls it with you during setup.
Yealink W73P (base station)
Section titled “Yealink W73P (base station)”Connect the base
Section titled “Connect the base”Plug the included network cable into the base and into a free port on your router or network switch. Then plug the base’s power adapter into an outlet. (If your switch supplies power over the network cable, called PoE, you can skip the adapter.)
Put the base somewhere central and in the open. The handset has to reach it from the counter and the kitchen.
Put in the battery and charge the handset
Section titled “Put in the battery and charge the handset”Put the battery in the handset and close the battery cover. The handset turns on by itself. Plug the charging cradle into an outlet with the second power adapter, and set the handset on it.
Let it finish setting itself up
Section titled “Let it finish setting itself up”The base downloads your store’s settings on its own. This takes a few minutes. When it’s ready, all three lights on the front of the base glow green, and the handset shows its handset number and name on the screen.
Test it
Section titled “Test it”Call your return-to-store number from a cell phone. The handset should ring. Or wait for your specialist, who calls it with you during setup.
Using the phone day to day
Section titled “Using the phone day to day”- Keep it on its charger near the counter between calls, so it never runs flat during a rush.
- Answer it like any phone. When Virnika transfers a caller, it rings like a normal call. Your store page shows the caller’s cart, so you don’t have to start the order over.
- Don’t reset it to factory settings. That erases your store’s line. If something seems wrong, contact us first.
- Changed your Wi-Fi password? On the AX83H, press OK, go to Wi-Fi → Wi-Fi Network and join your network again. The W73P uses a network cable, so it isn’t affected.
Troubleshooting
Section titled “Troubleshooting”The AX83H won't connect to Wi-Fi
- Check the password, including capital letters.
- Make sure you’re picking your staff network, not a guest network with a sign-in page.
- Try connecting it right next to your router. If it works there but not at the counter, your Wi-Fi doesn’t reach the counter well. Tell us and we’ll help you sort it out.
The phone is on Wi-Fi but doesn't ring when we test
Give it five minutes after it first connects, since it may still be downloading its settings. If it still doesn’t ring, contact us. We can see on our side whether the phone has checked in.
The W73P handset says Unregistered!
The handset isn’t paired with its base. To pair it:
- Press and hold the button on the front of the base (the one with the wireless symbol) until the top light starts flashing.
- Within 90 seconds, press the Reg button shown at the bottom of the handset’s screen.
- Wait for the handset to show “Handset Subscribed”.
If it asks for a PIN, enter 0000.
The lights on the W73P base aren't all green
Check that the base’s power adapter is plugged in and its network cable goes to your router or switch. If the lights still aren’t all green after a few minutes, contact us.
Transfers ring, but the call cuts out or sounds choppy
The phone has a weak connection where you’re standing. Move closer to your router (AX83H) or base station (W73P). If the counter is in a dead spot, tell us and we’ll help find a better spot.
Need help?
Section titled “Need help?”Email [email protected] or reach out to your onboarding specialist.